Beijing Jinde Chuangye Measurement and Control Technology Co., Ltd.
Beijing Jinde Chuangye Measurement and Control Technology Co., Ltd.
Our mission: Drive industrial automation and intelligent development through technological innovation
Our vision: Grow into a first-class enterprise and build a world-renowned instrumentation brand
Our values: Collaborate for win-win results and deliver higher-quality products and services
JYDT Type Densimeter - 产品图片
Non-contact environmentally friendly exempt type

JYDT Type Densimeter

Emission Type Gamma Ray
Detector Type NaI(Tl) Ultra-high Sensitivity Detector
Suitable for online real-time continuous measurement of density and concentration of liquids, ore slurries and fluids in pipelines in mining, coal, metallurgy, electric power, petrochemical and other industries. It is especially applicable to working conditions where production shutdown and pipeline cutting modification are not allowed, and high environmental and safety requirements are imposed.

The JYDT Densimeter is a non-contact eco-friendly radiometric instrument equipped with an environmentally exempt Na‑22 radioactive source, which poses no hazard to human health and causes no environmental pollution. Combined with high-end receivers and transmitters, it can accurately measure the density and concentration of liquids, fluids and ore slurries inside pipelines. Adopting a clamp-on design, the instrument requires no modification or cutting of pipelines for quick and easy installation. Featuring high precision and low maintenance, it is widely used in non-ferrous and non-metallic mines, coal, metallurgy, electric power, petrochemical and other industries.

IPB‑1K Density / Concentration Meter - 产品图片
Non-contact environmentally exempt type

IPB‑1K Density / Concentration Meter

Emission Type Gamma Ray
Detector Type NaI(Tl) ultra-high sensitivity detector
Suitable for online real-time continuous density / concentration measurement of media such as ore slurry, mud slurry, cement slurry, coal slurry, sludge slurry, chemical slurry in various industrial pipelines, especially for working conditions requiring no shutdown, no pipeline cutting or modification, and high environmental and safety requirements. 免费 今天 13:20

The IPB‑1K Densimeter is one of the most trusted non‑contact radioactive instruments from Ecophyspribor. Adopting Na‑22 nuclear radiation technology, it measures the density or concentration of media such as ore slurry, mud and cement slurry inside vessels and pipelines. The meter is externally clamped onto the pipeline without cutting or modifying it, enabling quick and easy installation. It delivers fast, reliable and accurate measurements even under harsh conditions. The Na‑22 nuclear radiation technology is harmless to human beings and environmentally friendly, addressing longstanding drawbacks of conventional gamma sources, including potential health risks and inconvenient on‑site installation and maintenance.

JYLD-track-3D-RBT - 产品图片
3D Scanning Rail Robot

JYLD-track-3D-RBT

Scanning Angle Max: 270°
Volume Measurement Accuracy ≤ 0.5%
Suitable for large material yards, open stockyards, silos and material sheds. It is especially applicable for high-precision inventory checking and level monitoring of extra-large and irregular stockpiles in coal, coking, iron and steel, power, grain industries, and meets the requirement of full scanning for long-span and complex yards that cannot be covered by conventional fixed instruments.

The JYLD‑track‑3D‑RBT 3D Scanning Rail Robot is a high‑end laser scanning device, a rail‑mounted laser inventory meter. With rails installed above the material shed, the instrument travels at a constant speed along the rail following the program set by the software management platform to scan the surface of stockpiles and acquire spatial point data. Adopting 3D modeling and computer graphics processing technologies, the system software displays the three‑dimensional view of the stockpile and calculates its volume, mass and other information.

JYLD3D-RBT-3C - 产品图片
LiDAR 3D Scanner

JYLD3D-RBT-3C

Scanning Angle Max: 270°
Volume Measurement Accuracy ≤ 0.5%
Mainly used for stockpile inventory in silos, sheds and open yards of various shapes in coal, coking, iron and steel, power, grain industries, as well as sites requiring high-precision and high-reliability bulk material level measurement.

The JYLD3D‑RBT‑3C LiDAR 3D Scanner is a fixed‑mount laser instrument. It is installed on the top of silos, sheds and other structures. Controlled by the software platform, the pan‑tilt unit performs reciprocating rotation to scan various large, complex and irregular stockpiles and quickly reconstruct the three‑dimensional solid model of materials. Meanwhile, it can calculate information such as material volume and mass, serving as a high‑end inventory scanning instrument. It is mainly used for stockpile inventory in silos, sheds and open yards of various shapes in coal, coking, iron and steel, power, grain industries, as well as sites requiring high‑precision and high‑reliability bulk material level measurement.

JYRD3D-RBT-C - 产品图片
3D Radar Scanning Robot

JYRD3D-RBT-C

Measuring Range 0.6 ~ 70 m
Volume Measurement Accuracy ≤ 1%
This product is widely used in mining, cement, coal, chemical, power, food industries, especially suitable for demanding and harsh working conditions.

The JYRD3D‑RBT‑C 3D radar scanning robot adopts 120~140 GHz frequency modulated continuous wave technology. It can scan and detect materials in solid silos and irregular bulk piles, accurately measuring data including the highest point, lowest point, average level, material volume and material weight inside silos or stockyards. Combined with 3D imaging technology and system software, it realizes intelligent three‑dimensional imaging, improves inventory checking management efficiency, accurately grasps inventory information, and perfectly solves level monitoring for closed and semi‑closed silos and stockyards.

ULM-3D-5 - 产品图片
3D LiDAR level scanner

ULM-3D-5

Measuring Range 0.3 m ~ 70 m
Ambient Temperature -50 ℃ ~ 70 ℃
Suitable for measuring food and non-food bulk materials, widely used in grain, mining, cement, coal, power industries.

ULM‑3D‑5 is a multi‑beam radar level scanner with an operating frequency of 120~140 GHz, designed to measure the level and volume of bulk materials inside vessels such as hoppers and silos. Featuring its unique design and ultra‑high‑frequency radar technology, the ULM‑3D‑5 radar level scanner enables multi‑point level measurement of bulk materials simultaneously. Based on measured data, the system generates a 3D profile of the bulk material surface inside the silo, and detects parameters including maximum level, minimum level, average level, volume and mass, which can be visualized via the system software.

ULM-MLS - 产品图片
Intelligent Microwave Level Switch

ULM-MLS

Monitoring Distance 100 m
Frequency and Antenna Power 24 GHz band, within 10 mW
Suitable for high/low level detection, material blockage detection and fluid flow monitoring in silos, hoppers and pipelines for mining, coal, chemical, metallurgical, power and other industries. It also supports machinery protection applications including cantilever protection, chute blockage detection, ship loader protection and vehicle positioning.

The ULM‑MLS Intelligent Microwave Level Switch is a level detection device based on the principle of ultra-narrow microwave pulse detection. It consists of a transmitter and a receiver installed in pairs. The transmitter sends microwave signals toward the receiver; when the microwave beam is obstructed by material, the receiver outputs a relay signal. The instrument features high stability and an intelligently adaptive power supply design.

JY‑ML Series - 产品图片
Sludge Interface Meter

JY‑ML Series

Medium Measurement Accuracy ±0.5%
Height Accuracy ±10 mm
Suitable for online visual monitoring of the interface height and density of sludge, clear liquid and settled layers in sedimentation tanks, thickeners, settling vessels and storage tanks. It is widely used in mining, coal washing, alumina production, environmental water treatment and other industries.

The sludge interface meter is a dedicated instrument developed for solid‑liquid interface measurement. It accurately detects the height of layered interfaces inside sedimentation tanks, vessels and thickeners, provides an online real‑time visual profile of stratification, and displays parameters such as density data of each layer.

JY-TFDT - 产品图片
Tuning Fork Densimeter

JY-TFDT

Measuring Range 0 ~ 3 g/cm³
Measurement Accuracy ±0.5%
Suitable for accurate online density and concentration measurement of liquid media in chemical, petrochemical, pharmaceutical, metallurgical, power, food and beverage industries.

The JY‑TFDT Tuning Fork Density Meter stands out by adopting advanced frequency tracking technology. Designed based on the principle of resonant acoustic waves, its vibration alters as liquid flows through the sensor, resulting in a shift in resonant frequency for liquid density detection. It features outstanding advantages of high precision and great adaptability.

JY-NCF-1500 - 产品图片
Non-contact Mass Flowmeter

JY-NCF-1500

Mass Flow Accuracy ±1%
Density Measurement Accuracy ±1%
Suitable for online real-time measurement of mass flow, density and flow velocity of fluids (slurries, liquids, mud, etc.) in pipelines for thermal power desulfurization, chemical, metallurgical, mining and other industries. It is especially applicable to complex working conditions featuring strong corrosion, heavy abrasion, easy scaling, and uneven density or flow velocity.

The JY‑NCF‑1500 Non‑contact Mass Flowmeter is an innovative flow measuring device that breaks the limitations of traditional contact measurement. It can accurately determine the mass flow of various fluids without direct contact with them. Integrating advanced sensor technology and intelligent algorithms, it maintains stable operation even under complex working conditions and measures fluid density, flow velocity and mass flow. It is particularly suitable for pipeline measurement with uneven density and flow velocity. Thanks to its non‑contact design, it works reliably in harsh environments involving corrosion, abrasion and scaling, and is widely used in thermal power desulfurization and other industries.

JYLS型物位开关 - 产品图片
Non-contact environmentally friendly exempt type

JYLS型物位开关

Radiation Type Gamma Ray
Detector Type NaI(Tl) Ultra-high Sensitivity Detector
Suitable for real-time high/low level alarming of liquids and bulk solids in storage tanks, silos and reactors in power, coal, mining, chemical and other industries. It is particularly suited for harsh working conditions such as high temperature, high pressure, strong corrosion, high toxicity and heavy dust, where conventional contact switches cannot function properly.

The JYLS Level Switch is a non‑contact radiometric instrument for high or low level alarming. The radioactive source and detector are installed on opposite sides of the measured vessel. As the material level changes, the intensity of gamma rays received by the detector varies. The data processing transmitter outputs high/low alarm signals based on the detector’s feedback. This instrument adopts an eco‑exempt Na‑22 radioactive source, which is harmless to human health and environmentally friendly. With external mounting, it is immune to abrasion, corrosion and other properties of the process medium, and can operate reliably under demanding and harsh working conditions.

Show more products