JYDT Type Densimeter
The JYDT Densimeter is a non-contact eco-friendly radiometric instrument equipped with an environmentally exempt Na‑22 radioactive source, which poses no hazard to human health and causes no environmental pollution. Combined with high-end receivers and transmitters, it can accurately measure the density and concentration of liquids, fluids and ore slurries inside pipelines. Adopting a clamp-on design, the instrument requires no modification or cutting of pipelines for quick and easy installation. Featuring high precision and low maintenance, it is widely used in non-ferrous and non-metallic mines, coal, metallurgy, electric power, petrochemical and other industries.
IPB‑1K Density / Concentration Meter
The IPB‑1K Densimeter is one of the most trusted non‑contact radioactive instruments from Ecophyspribor. Adopting Na‑22 nuclear radiation technology, it measures the density or concentration of media such as ore slurry, mud and cement slurry inside vessels and pipelines. The meter is externally clamped onto the pipeline without cutting or modifying it, enabling quick and easy installation. It delivers fast, reliable and accurate measurements even under harsh conditions. The Na‑22 nuclear radiation technology is harmless to human beings and environmentally friendly, addressing longstanding drawbacks of conventional gamma sources, including potential health risks and inconvenient on‑site installation and maintenance.
JYLD-track-3D-RBT
The JYLD‑track‑3D‑RBT 3D Scanning Rail Robot is a high‑end laser scanning device, a rail‑mounted laser inventory meter. With rails installed above the material shed, the instrument travels at a constant speed along the rail following the program set by the software management platform to scan the surface of stockpiles and acquire spatial point data. Adopting 3D modeling and computer graphics processing technologies, the system software displays the three‑dimensional view of the stockpile and calculates its volume, mass and other information.
JYLD3D-RBT-3C
The JYLD3D‑RBT‑3C LiDAR 3D Scanner is a fixed‑mount laser instrument. It is installed on the top of silos, sheds and other structures. Controlled by the software platform, the pan‑tilt unit performs reciprocating rotation to scan various large, complex and irregular stockpiles and quickly reconstruct the three‑dimensional solid model of materials. Meanwhile, it can calculate information such as material volume and mass, serving as a high‑end inventory scanning instrument. It is mainly used for stockpile inventory in silos, sheds and open yards of various shapes in coal, coking, iron and steel, power, grain industries, as well as sites requiring high‑precision and high‑reliability bulk material level measurement.
JYRD3D-RBT-C
The JYRD3D‑RBT‑C 3D radar scanning robot adopts 120~140 GHz frequency modulated continuous wave technology. It can scan and detect materials in solid silos and irregular bulk piles, accurately measuring data including the highest point, lowest point, average level, material volume and material weight inside silos or stockyards. Combined with 3D imaging technology and system software, it realizes intelligent three‑dimensional imaging, improves inventory checking management efficiency, accurately grasps inventory information, and perfectly solves level monitoring for closed and semi‑closed silos and stockyards.
JYRD-3D-SCAN
The JYRD‑3D‑SCAN 3D radar level scanner is a 3D imaging scanning instrument jointly developed by our company in cooperation with the Limark brand. It is a domestically joint‑venture developed version of the Limark ULM‑3D‑5 series 3D radar level scanner.
ULM-3D-5
ULM‑3D‑5 is a multi‑beam radar level scanner with an operating frequency of 120~140 GHz, designed to measure the level and volume of bulk materials inside vessels such as hoppers and silos. Featuring its unique design and ultra‑high‑frequency radar technology, the ULM‑3D‑5 radar level scanner enables multi‑point level measurement of bulk materials simultaneously. Based on measured data, the system generates a 3D profile of the bulk material surface inside the silo, and detects parameters including maximum level, minimum level, average level, volume and mass, which can be visualized via the system software.
ULM-MLS
The ULM‑MLS Intelligent Microwave Level Switch is a level detection device based on the principle of ultra-narrow microwave pulse detection. It consists of a transmitter and a receiver installed in pairs. The transmitter sends microwave signals toward the receiver; when the microwave beam is obstructed by material, the receiver outputs a relay signal. The instrument features high stability and an intelligently adaptive power supply design.
JY‑ML Series
The sludge interface meter is a dedicated instrument developed for solid‑liquid interface measurement. It accurately detects the height of layered interfaces inside sedimentation tanks, vessels and thickeners, provides an online real‑time visual profile of stratification, and displays parameters such as density data of each layer.
JY-TFDT
The JY‑TFDT Tuning Fork Density Meter stands out by adopting advanced frequency tracking technology. Designed based on the principle of resonant acoustic waves, its vibration alters as liquid flows through the sensor, resulting in a shift in resonant frequency for liquid density detection. It features outstanding advantages of high precision and great adaptability.
JY-NCF-1500
The JY‑NCF‑1500 Non‑contact Mass Flowmeter is an innovative flow measuring device that breaks the limitations of traditional contact measurement. It can accurately determine the mass flow of various fluids without direct contact with them. Integrating advanced sensor technology and intelligent algorithms, it maintains stable operation even under complex working conditions and measures fluid density, flow velocity and mass flow. It is particularly suitable for pipeline measurement with uneven density and flow velocity. Thanks to its non‑contact design, it works reliably in harsh environments involving corrosion, abrasion and scaling, and is widely used in thermal power desulfurization and other industries.
JYLS型物位开关
The JYLS Level Switch is a non‑contact radiometric instrument for high or low level alarming. The radioactive source and detector are installed on opposite sides of the measured vessel. As the material level changes, the intensity of gamma rays received by the detector varies. The data processing transmitter outputs high/low alarm signals based on the detector’s feedback. This instrument adopts an eco‑exempt Na‑22 radioactive source, which is harmless to human health and environmentally friendly. With external mounting, it is immune to abrasion, corrosion and other properties of the process medium, and can operate reliably under demanding and harsh working conditions.